Before Working Inside Your Computer | 11
Before Working Inside Your Computer
Before You Begin
CAUTION: To avoid losing data, save and close all open files and exit
all open programs before you turn off your computer.
1 Save and close all open files, exit all open programs, and turn off your computer.
• Microsoft Windows 8: Point to the lower/upper-right corner of the screen to open
the Charms sidebar and click Settings Power Shut down.
• Microsoft Windows 7: Click Start Shut down.
NOTE: If you are using a different operating system, see the documentation
of your operating system for shut-down instructions.
2 After the computer shuts down, disconnect it from the electrical outlet.
3 Disconnect all cables — such as power and USB cables — from your computer.
4 Disconnect all peripherals from your computer.
Recommended Tools
The procedures in this document require the following tools:
• Phillips screwdriver
• Torx #5 (T5) screwdriver
• Plastic scribe
book.book Page 11 Friday, June 28, 2013 3:27 PM
To Next Page
Loading...
