Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
World facing camera
Removing world facing camera
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove thesystem board
Steps
1. Remove the single (M2.5x2.5) screw that secures the world facing camera to the palmrest [1].
2. Lift the camera away from the system [2].
48
Removing and Installing
To Next Page
Loading...
