Next steps
1. Install the display panel.
2. Install the display assembly.
3. Install thebattery.
4. Install the base cover.
5. Install the microSD card.
6. Follow the procedure in after working inside your computer.
Palm rest
Replacing palmrest assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the speakers.
6. Remove the keyboard.
7. Remove the IO board.
8. Remove the display assembly.
9. Remove the system board.
70
Removing and Installing