Dell Dimension XPS R Series User Manual

A-6 Dell Dimension XPS R xxx Systems Service Manual
7DEOH $ ,'( & RQILJXUDWL RQ 6XEPHQX 2SWLRQV
2SWLRQ )XQFWLRQ
IDE Controller Configures integrated primary and secondary IDE con-
trollers and detects types of drives attached to them.
If set to Primary, Secondary, or Both, the designated
controller(s) are enabled, and the types of drives
attached appear. If this option is set to either Primary
or Secondary, the other controller is not enabled
and the IRQ it normally uses becomes available. If set
to Disabled, the system cannot detect any drives
attached to the controllers and displays None for all
four IDE drive categories.
Primary IDE
Master
Identifies the first drive attached to the primary EIDE
interface, usually the boot hard-disk drive. See the
next subsection, “Primary IDE Master Submenu.”
Primary IDE Slave Identifies the second drive attached to the primary
EIDE interface, usually a second hard-disk drive. The
format of this submenu is the same as the one
described in the next subsection, “Primary IDE Mas-
ter Submenu.”
Secondary IDE
Master
Identifies the first drive attached to the secondary
EIDE interface, usually a CD-ROM or tape drive. The
format of this submenu is the same as the one
described in the next subsection, “Primary IDE Mas-
ter Submenu.”
Secondary IDE
Slave
Identifies the second drive attached to the secondary
EIDE interface, usually a CD-ROM or tape drive. The
format of this submenu is the same as the one
described in the next subsection, “Primary IDE Mas-
ter Submenu.”

Dell Dimension XPS R Series Specifications

General

Brand	Dell
Model	Dimension XPS R Series
Category	Desktop
Language	English