EasyManuals Logo

Dell Edge Gateway 3003 User Manual

Dell Edge Gateway 3003
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
4. For example, set the wake-up event for 60 seconds:
(root)# echo +60 > /sys/class/rtc/rtc0/wakealarm
5. For example, place the Edge Gateway in suspend mode:
(root)# systemctl suspend
If successful, the RTC will wake up the Edge Gateway in 60 seconds.
Configuring system wake-up from low-power states (S3/S4/S5)LAN
1. Enable Wake on LAN in the BIOS program. For more information on accessing the BIOS program, see Accessing BIOS
settings. Alternatively, use Dell Command | Configure.
# sudo /opt/dell/dcc/cctk --wakeonlan=enable
2. Enable Wake on LAN in nmcli (enabled by default).
# nmcli c show Wired connection 1 | grep wake
802-3-ethernet.wake-on-lan: magic
# nmcli c show Wired connection 2 | grep wake
802-3-ethernet.wake-on-lan: magic
3. Make sure the ethernet connection is up and running with the assigned IP address.
4. Perform sleep.
# sudo systemctl sleep
Or, perform hibernation.
# sudo systemctl hibernate
5. Use another system to wake from LAN (Supported tools: wakeonlan and etherwake).
# sudo wakeonlan MAC
# sudo etherwake MAC
Ubuntu Network Manager
Network-Manager is a native Ubuntu Server connection manager. The application can be used to configure the Edge Gateway
so that it is automatically-detected and connected to the network. The application can be used to configure multiple network
devices.
A command-line utility nmcli is included with Network-Manager to support non-graphical user interface configurations.
NOTE: For more information about Network-Manager, see wiki.archlinux.org/index.php/NetworkManager.
Connecting through WWAN
NOTE:
For more information on configuring and connecting through WWAN, see docs.ubuntu.com/core/en/stacks/
network/network-manager/docs/configure-cellular-connections.
1. Check if a modem is present and identify the modem index number.
# sudo mmcli L
2. Check the modem status and identify the primary port.
# sudo mmcli -m<0>
NOTE:
<0> refers to the modem index number. Replace <0> with the modem index number after running the command
at step 1.
74 Setting up the operating system

Table of Contents

Other manuals for Dell Edge Gateway 3003

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell Edge Gateway 3003 and is the answer not in the manual?

Dell Edge Gateway 3003 Specifications

General IconGeneral
BrandDell
ModelEdge Gateway 3003
CategoryGateway
LanguageEnglish

Related product manuals