Removing the hard-drive cage
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box PC. After working inside your
Embedded Box PC, follow the steps in After working inside your Embedded
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.
CAUTION: Hard drives/solid-state drives are fragile. Exercise care when
handling the Solid-state/hard drive.
CAUTION: To avoid data loss, do not remove the hard drive/solid-state drive
while the Embedded Box PC is in sleep or on state.
Prerequisites
Follow step 1 to step 6 in “Removing the back cover”.
Procedure
1 Remove the screws that secure the hard-drive cage to the back cover.
24