Dell Embedded Box PC5000 - Replacing the Hard-Drive Cage; Procedure; Post-Requisites

Replacing the hard-drive cage
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box PC. After working inside your
Embedded Box PC, follow the steps in After working inside your Embedded
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.
CAUTION: Hard drives/solid-state drives are fragile. Exercise care when
handling the Solid-state/hard drive.
Procedure
1 Align the screw holes on the hard-drive cage with the screw holes on the back
cover.
2 Replace the screws that secure the hard-drive cage to the back cover.
Post-requisites
Follow step 2 to step 8 in “Replacing the back cover”.
26