Dell Embedded Box PC5000 - Removing the Solid-State Drive from Bracket; Prerequisites; Procedure

Removing the solid-state drive
from bracket
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box PC. After working inside your
Embedded Box PC, follow the steps in After working inside your Embedded
Box PC. For more safety best practices, see the Regulatory Compliance
home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the
solid-state drive.
Prerequisites
1 Follow step 1 to step 6 in “Removing the back cover”.
2 Remove the drives from the hard-drive cage.
Procedure
NOTE: Embedded Box PC is shipped with hard drive, solid-state drive, or
both, depending on the conguration ordered.
1 Remove the screw that secures the solid-state drive to the solid-state drive
bracket.
31