Dell Embedded Box PC5000 Service Manual

Removing the interposer board
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box PC. After working inside your
Embedded Box PC, follow the steps in After working inside your Embedded
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Follow step 1 to step 6 in “Removing the back cover”.
2 Remove the drives from the hard-drive cage.
3 Remove the solid-state drive from bracket.
Procedure
1 Remove the screws that secure the interposer board to the solid-state drive card
bracket.
34

Dell Embedded Box PC5000 Specifications

General

Brand	Dell
Model	Embedded Box PC5000
Category	Computer Hardware
Language	English