Figure 102. Removing the cooling fan cage board.
Next steps
Replace the cooling fan cage board.
Installing the cooling fan cage board
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the following components:
a. Air shroud
b. Cooling fan cage assembly
4. Disconnect cables from the fan board.
Steps
1. Align and lower the fan board with the screw holes in the system.
2. Using a Phillips #2 screwdriver. tighten the screws that secures the fan board to the system
Installing and removing system components
103
To Next Page
Loading...
