Cable routing
Figure 47. 8 x 2.5-inch SAS/SATA
Table 16. 8 x 2.5-inch SAS/SATA
From To
CTRL_DST_PA1 (Signal connector on the front PERC) SL3_CPU1_PB2 (Signal connector on system board)
BP_PWR_1 (Power connector on backplane) SIG_PWR_3 (Power connector on system board)
BOSS_PWR (BOSS card power connector) BOSS_PWR (Power connector for BOSS card on system
board)
SL10_PCH_PA5 (BOSS signal connector on system board) BOSS signal on BOSS S2 card module
Figure 48. 8 x 3.5-inch SAS/SATA
56
Installing and removing system components
To Next Page
Loading...
