Dell EMC PowerEdge R730xd - 12 X 3.5-Inch Hard Drive

Table 1. Front panel of the 24 x 2.5-inch hard drive/SSD PowerEdge R730xd chassis (continued)
Item Indicator, Button, or
Connector
Icon Description
4 Information tag Contains system information such as service tag, NIC, MAC
address for your reference. The information tag is a slide-out
label panel.
5
Hard drives
Up to twenty four 2.5 inch hot-swappable hard drives or solid
state drives (SSD).
6 USB management port/iDRAC
Direct
The USB management port is USB 2.0 compliant. Enables you
to connect USB devices to the system or provides access
to the iDRAC Direct features. For more information, see the
Integrated Dell Remote Access Controller User’s Guide at
Dell.com/idracmanuals.
7 Video connector Enables you to connect a display to the system.
8 Quick Sync (optional)
Indicates a Quick Sync enabled system. The Quick Sync
feature is optional and needs a Quick Sync bezel. This feature
allows management of the system by using mobile devices.
This feature aggregates hardware or firmware inventory and
various system level diagnostic and error information that can
be used in troubleshooting the system. For more information,
see the Integrated Dell Remote Access Controller User’s
Guide at Dell.com/idracmanuals.
12 x 3.5-inch hard drive
Figure 3. 12 x 3.5-inch hard drive chassis
1. System identification button 2. Power button
3. NMI button 4. Information tag
5. Hard drives 6. USB management port/iDRAC Direct
7. Video connector 8. Quick Sync
Table 2. Front panel of the 12 x 3.5-inch hard drive PowerEdge R730xd chassis
Item Indicator, Button, or
Connector
Icon Description
1 System identification button Enables you to locate a particular system within a rack.
The identification buttons are located on the front and back
panels.
Press the system identification button to turn the system ID
on or off.
Dell PowerEdge R730xd system overview 11