Figure 46. Opening the PCIe card holder latch
a. PCIe card holder
b. release tab
c. PCIe card holder latch
Figure 47. Closing the PCIe card holder latch
a. PCIe card holder
b. release tab
c. PCIe card holder latch
Next steps
Follow the procedure listed in the After working inside your system section.
Cable retention bracket
Cable retention bracket provides support to the installed cables. The cable retention bracket also helps to prevent the cables
from moving out of place, which may result in loose connections and reduced air flow inside the server.
Removing the cable retention bracket
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. If installed, remove the cooling shroud.
4. Remove the PCIe card holder.
5. Remove all cables routed through the cable retention bracket.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
110 Installing and removing system components
To Next Page
Loading...
