Option Description
System CPLD
Version
Specifies the current version of the system complex programmable logic device (CPLD) firmware.
UEFI Compliance
Version
Specifies the UEFI compliance level of the system firmware.
Related references
System Information on page 49
System Information details on page 49
Related tasks
Viewing System Information on page 49
Memory Settings
You can use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions,
such as memory testing and node interleaving.
Related references
Memory Settings details on page 50
System BIOS on page 38
Related tasks
Viewing Memory Settings on page 50
Viewing Memory Settings
To view the Memory Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Memory Settings.
Related references
Memory Settings on page 50
Memory Settings details on page 50
Memory Settings details
About this task
The Memory Settings screen details are explained as follows:
50 Pre-operating system management applications
To Next Page
Loading...
