Dell EMC PowerEdge R730xd - Miscellaneous Settings

Option Description
Enabled Cores
for Processor 1
Controls the number of turbo boost enabled cores for processor 1. The maximum number of cores is
enabled by default.
Monitor/Mwait Enables the Monitor/Mwait instructions in the processor. This option is set to Enabled for all system
profiles, except Custom by default.
NOTE: This option can be disabled only if the C States option in the Custom mode is set to
disabled.
NOTE: When C States is set to Enabled in the Custom mode, changing the Monitor/Mwait setting
does not impact the system power or performance.
Related references
System Profile Settings on page 60
Related tasks
Viewing System Profile Settings on page 60
Miscellaneous Settings
You can use the Miscellaneous Settings screen to perform specific functions such as updating the asset tag and changing the
system date and time.
Related references
System BIOS on page 38
Related tasks
Miscellaneous Settings details on page 63
Viewing Miscellaneous Settings on page 62
Viewing Miscellaneous Settings
To view the Miscellaneous Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Miscellaneous Settings.
Related references
Miscellaneous Settings on page 62
Related tasks
Miscellaneous Settings details on page 63
62 Pre-operating system management applications