Dell EMC PowerEdge R740 - Installing the Optional Idsdm;Vflash Card

Figure 73. Removing the optional IDSDM/vFlash card
Next steps
Install the optional IDSDM/vFlash card.
Related links
System board jumpers and connectors
Removing the expansion card from expansion card riser
Removing the micro SD card
Installing the optional IDSDM/vFlash card
Installing the optional IDSDM/vFlash card
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Steps
1 Locate the IDSDM/vFlash connector on the system board.
To locate IDSDM/vFlash, see the System board jumpers and connectors section.
2 Align IDSDM/vFlash card with the connector on the system board.
3 Push IDSDM/vFlash card until it is rmly seated on the system board.
126
Dell EMC PowerEdge R740 Installation and Service Manual
Installing and removing system components