Dell EMC PowerEdge R740 - Network Daughter Card; Removing the Network Daughter Card

Figure 74. Installing the optional IDSDM/vFlash card
Next steps
1 Install the micro SD cards.
NOTE
: Re-install the micro SD cards into the same slots based on the labels you had marked on the cards during
removal.
2 If applicable, install the full height PCIe card.
3 Follow the procedure listed in After working inside your system.
Related links
System board jumpers and connectors
Installing the micro SD card
Installing expansion card into expansion card riser
Network daughter card
The network daughter card (NDC) is a small, removable mezzanine card, which provides the exibility of selecting dierent network
connectivity options.
CAUTION
: If the GPU card is installed, you cannot install the 10 GbE NDC.
Removing the network daughter card
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
Dell EMC PowerEdge R740 Installation and Service Manual
Installing and removing system components
127