Figure 84. Removing hard drive backplane
Next steps
Install the hard drive backplane.
Related links
Removing the air shroud
Removing the cooling fan assembly
Removing the backplane cover
Removing a hard drive
Installing hard drive backplane
Installing hard drive backplane
The procedure to install the backplane is identical for all backplane congurations.
Prerequisites
Follow the safety guidelines listed in Safety instructions.
Steps
1 Use the hooks on the system as guides to align the hard drive backplane.
2 Lower the hard drive backplane until the release tabs snap into place.
134
Dell EMC PowerEdge R740 Installation and Service Manual
Installing and removing system components