Dell Force10 E1200 - Page 74

74 | System Boot
www.dell.com | support.dell.com
Refer to the FTOS Command Line Interface Reference for CLI configuration procedures and
configuration instructions.
9 dir flash:
dir slot0:
Use the dir flash: command to list files stored on the internal flash device.
Use the dir slot0: command to list files stored on the external flash device.
10 reload Reload software.
The autoboot program initializes and displays self-test results on the console
screen.
NOTE: Do not press break control sequence at any time during the boot/reboot
process. Doing so causes the boot process to terminate.
11 Force10> When the reboot completes, the CLI defaults to the EXEC mode.
Step Command Task (continued)
BOOT_USER # show default-gateway
No gateway IP address specified!
BOOT_USER # default-gateway ip 1.2.3.5
Gateway IP address 1.2.3.5
BOOT_USER # dir flash:
Displaying files in flash:
size date time name
-------- ------ ------ --------
11187685 FEB-15-2002 05:37:58 e1200-.bin
11031398 FEB-23-2002 22:42:46 E1200-3.bin