Dell G5 5587 - Page 132

Identifier GUID-993C6943-13A1-4FE1-99C4-80A9AD86FF46
Status Released
Enabling or disabling the USB in BIOS setup program
1 Turn on or restart your computer.
2 Press F2 when the Dell logo is displayed on the screen to enter the BIOS setup program.
The BIOS setup program is displayed.
3 On the left pane, select Settings > System Conguration > USB Conguration.
The USB conguration is displayed on the right pane.
4 Select or clear the Enable External USB Port check box to enable or disable it respectively.
5 Save the BIOS setup program settings and exit.
Identifier GUID-597AD25C-F728-4254-8597-E23761743996
Status Released
Identifying the hard drive in BIOS setup program
1 Turn on or restart your computer.
2 Press F2 when the Dell logo is displayed on the screen to enter the BIOS setup program.
A list of hard drives is displayed under the System Information in the General group.
Identifier GUID-62B237DD-0D71-4196-837A-5835AB695413
Status Released
Checking the system memory in BIOS setup program
1 Turn on or restart your computer.
2 Press F2 when the Dell logo is displayed on the screen to enter the BIOS setup program.
3 On the left pane, select Settings > General > System Information.
The memory information is displayed on the right pane.
Identifier GUID-D3E8035A-ECFC-47A3-90D3-87FF562DB0EC
Status Released
System setup options
NOTE
: Depending on this computer and its installed devices, the items listed in this section may or may not appear.
Table 5. System setup options—System information menu
General-System Information
System Information
BIOS Version Displays the BIOS version number.
132 System setup