Dell G5 5587 - Post-Requisites

6 Turn the computer base over.
7 Remove the two screws (M2.5x5) that secure the power-adapter port bracket to the computer base.
8 Lift the power-adapter port bracket o the computer base.
9 Remove the two screws (M2.5x5) that secure the USB Type-C port bracket to the system board.
10 Lift the USB Type-C port bracket o the system board.
11 Disconnect the speaker cable from the system board.
12 Remove the four screws (M2x3) that secure the fans to the system board.
13 Remove the three screws (M2.5x5) that secure the system board to the computer base.
14 Gently release the ports on the system board from the slots on the computer base and lift the system board o the computer base.
Removing the system board
61