Identifier GUID-1F5023F5-9868-4AAF-A9F5-BFB400CD890A
Status Released
Replacing the memory modules
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Identifier GUID-A06594EA-F6EE-452D-82A1-77B24CAA2BC8
Status Released
Procedure
1 Align the notch on the memory module with the tab on the memory-module slot.
2 Slide the memory module rmly into the slot at an angle.
3 Press the memory module down until it clicks into place.
NOTE
: If you do not hear the click, remove the memory module and reinstall it.
Identifier GUID-B24ACA65-0D59-4C09-9CC9-A05E7E6EB280
Status Released
Post-requisites
Replace the base cover.
8
Replacing the memory modules 23
To Next Page
Loading...
