Identifier GUID-D3FE0BE4-9B4F-4CD6-AA62-7E9E26B84AD4
Status Released
Removing the status-light board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Identifier GUID-8F616A22-51CA-4B47-A009-3B35D552D3F6
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Follow the procedure from step 1 to step 18 in Removing the computer base.
Identifier GUID-38245E5A-3056-4B09-B8D4-E78C5B3C90E2
Status Released
Procedure
NOTE
: The status-light board includes an LED indicator for power and battery-status light/hard-drive activity light.
1 Open the latch and disconnect the status-light board cable from the status light board.
2 Remove the screw (M2x3) that secures the status-light board to the computer base.
3 Lift the status-light board o the computer base.
21
52 Removing the status-light board
To Next Page
Loading...
