Identifier GUID-DB825F91-AB3C-47B9-A43E-A9B2B38F0AFD
Status Released
Removing the palm rest
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Identifier GUID-14F93811-040B-4B39-896C-A3FA85F4DD78
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Remove the wireless card.
5 Follow the procedure from step 1 to step 17 in Removing the computer base.
6 Remove the display assembly.
7 Remove the power-button board.
8 Remove the ngerprint-reader board.
9 Remove the touchpad.
10 Remove the keyboard.
Identifier GUID-D9E4F9D9-800A-471F-B720-6BFD6E56D9D6
Status Released
Procedure
After performing the steps in prerequisites you are left with the palm-rest and keyboard assembly.
41
Removing the palm rest 97
To Next Page
Loading...
