Dell G5 5587 - 21 Removing the Status-Light Board; Prerequisites; Procedure

4 Align the screw holes on the hard-drive assembly with the screw holes on the computer base.
5 Replace the four screws (M2.5x3) that secure the hard-drive assembly to the computer base.
6 Adhere the hard-drive cable to the computer base.
7 Slide the hard-drive cable into the connector on the system board and close the latch to secure the hard-drive cable.
Identifier GUID-80134445-00E4-4B23-B20C-B5AD74BED996
Status Released
Post-requisites
1 Replace the battery.
2 Replace the base cover.
Replacing the hard drive
43