8 Open the latch and disconnect the power-button board cable from the system board.
9 Open the latch and disconnect the keyboard-backlight cable from the system board.
10 Open the latch and disconnect the touchpad cable from the system board.
11 Peel oî the tape that secures the keyboard cable to the system board.
12 Open the latch and disconnect the keyboard cable from the system board.
13 Remove the 19 screws (M2.5x6) that secure the computer base to the palm-rest assembly.
14 Remove the four screws (M2x3) that secure the computer base to the palm-rest assembly.
Removing the computer base
45
To Next Page
Loading...
