Identifier GUID-2DF70EB1-9D26-4051-8B7C-FB14A89925D8
Status Released
Replacing the display assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Identifier GUID-B8C3FA28-CBD5-4B17-96A1-697156AE60C5
Status Released
Procedure
1 Place the palm-rest assembly on the display assembly.
2 Using the alignment posts, close the display hinges.
3 Replace the two screws (M2.5x5) that secure the display hinges to the palm-rest assembly.
38
Replacing the display assembly 89
To Next Page
Loading...
