Dell G5 5587 - 48 Replacing the Display Panel; Procedure

Identifier GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Status Released
Removing the display assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Identifier GUID-65A1E669-C1E8-4E1A-B116-B359BAAAB746
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Remove the wireless card.
5 Follow the procedure from step 1 to step 17 in Removing the computer base.
Identifier GUID-1CD783E6-3A2B-4C95-8441-6547373AAD94
Status Released
Procedure
1 Peel o the tapes that secure the display hinges to the palm-rest assembly.
2 Remove the two screws (M2.5x5) that secure the display hinges to the palm-rest assembly.
3 Open the display hinges at an angle of 90 degrees.
37
86 Removing the display assembly