Dell G5 5587 - 36 Replacing the Touchpad; Procedure; Post-Requisites

Identifier GUID-96D83F1A-F293-4C81-AEC6-0CC1436500E9
Status Released
Post-requisites
1 Follow the procedure from step 7 to step 23 in Replacing the computer base.
2 Replace the rear cover.
3 Replace the battery.
4 Replace the base cover.
Identifier GUID-C264FC4F-B5CD-4F08-9183-CB9FC26A5E6A
Status Released
Entering the Service Tag in the BIOS setup program
1 Turn on or restart your computer.
2 Press F2 when the Dell logo is displayed to enter the BIOS setup program.
3 Navigate to the Main tab and enter the Service Tag in the Service Tag Input eld.
NOTE
: Service tag is the alphanumeric identier located at the back side of your computer.
Replacing the system board 65