Identifier GUID-51F6F052-95CC-40F8-98EC-1716F71D0367
Status Released
Replacing the rear cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Identifier GUID-A2991AA0-1314-458A-A31C-F30AC0850A66
Status Released
Procedure
1 Slide the tabs on the rear cover into the slots on the computer base and snap the rear cover into place.
2 Replace the four screws (M2x2) that secure the rear cover to the computer base.
16
38 Replacing the rear cover
To Next Page
Loading...
