Dell G5 5587 - 19 Removing the Computer Base; Prerequisites; Procedure

Identifier GUID-21C23FE4-8B12-456E-B414-D67A0DEECEB4
Status Released
Removing the rear cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Identifier GUID-40DD66AC-7BD6-4099-BEFD-4117D67151D6
Status Released
Prerequisites
Remove the base cover.
Identifier GUID-E27628AB-ED16-47A9-B971-E71B3C60BFF7
Status Released
Procedure
1 Remove the four screws (M2x2) that secure the rear cover to the computer base.
2 Using a plastic scribe, release the tabs on the rear cover from the slots on the computer base.
3 Pry the rear cover starting from the center, to the left and then to the right.
4 Remove the rear cover from the computer base.
15
36 Removing the rear cover