Dell G5 5587 - Page 48

Identifier GUID-BD8F2FF7-9861-42AD-82C7-DF6983529215
Status Released
Replacing the computer base
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Identifier GUID-ED790FCA-A5BF-4924-AB0B-7497249028C2
Status Released
Procedure
1 Place the computer base on a clean and at surface.
2 Replace the power-adapter port.
3 Replace the system board.
4 Replace the speakers.
5 Replace the status-light board.
6 Replace the coin-cell battery
7 Open the display and align the palm-rest assembly on the computer base.
8 Press down the edges of the palm-rest assembly and snap it into place.
20
48 Replacing the computer base