Identifier GUID-A35BD2D5-B3B3-4708-AF1C-D61C58B9F952
Status Released
Removing the power-button board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Identifier GUID-AAACBF2D-0730-4C18-88CA-E0CA01223D46
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Remove the computer base.
5 Follow the procedure from step 1 to step 17 in Removing the computer base.
Identifier GUID-545757E4-74BA-416C-BCE2-AC83F5FEC16F
Status Released
Procedure
1 Close the display and turn the palm-rest assembly over.
2 Peel the tape that secures the ngerprint-reader board and the power-button board to the palm-rest assembly.
31
74 Removing the power-button board
To Next Page
Loading...
