CAUTION: Place the computer on a soft and clean surface to avoid scratching the display.
4. Place the computer face down on a flat surface.
5. Remove the four screws (M2.5x2.5 Big Head) that secure the display assembly to the palm-rest assembly.
Figure 22. Removing the display assembly
1.
display assembly 2. screws (4)
3. display hinges (2) 4. palm-rest assembly
6. Lift the display assembly off the palm-rest assembly.
Figure 23. Display assembly
a. display assembly
54
Removing the display assembly
To Next Page
Loading...
