Replacing the palm-rest assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
Place the palm-rest and keyboard assembly on a flat surface with the keyboard facing down.
Post-requisites
1. Replace the keyboard.
2. Replace the system board.
3. Replace the speakers.
4. Replace the status light board.
5. Replace the power and volume-buttons board.
6. Replace the power-adapter port.
7. Replace the I/O board.
8. Replace the heat sink.
9. Replace the display assembly.
10. Replace the touch pad.
11. Replace the fan.
12. Replace the wireless card.
13. Replace the solid-state drive.
14. Replace the coin-cell battery.
15. Replace the memory modules.
16. Replace the battery.
17. Replace the base cover.
38
68 Replacing the palm-rest assembly
To Next Page
Loading...
