Figure 24. Disconnecting the cables
1. I/O-board cable 2. display cable
3. tape (3) 4. touch-screen cable
5. system board
3. Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.
4. Open the latch to disconnect the I/O-board cable from the system board.
5. Disconnect the power-adapter cable and the speaker cable from the system board.
6. Open the latch and disconnect the status-light board cable, keyboard cable, keyboard backlit cable, and touch-pad cable
from the system board.
Removing the system board
57
To Next Page
Loading...
