Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the secure digital card.
3. Remove the base cover.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x3.5) that secures the wireless-card bracket to the system board.
2. Slide and remove the wireless-card bracket from the wireless card.
3. Disconnect the WLAN antenna cables from the connectors on the wireless card.
4. Slide and remove the wireless card from the wireless-card slot on the system board.
Removing and installing components
33
To Next Page
Loading...
