Next steps
1. Install the base cover.
2. Install the secure digital card.
3. Follow the procedure in After working inside your computer.
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the secure digital card.
3. Remove the base cover.
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the connector on the system board.
NOTE:
To disconnect the speaker cable featuring an eight-pin connector from the system board, pry up the bottom side
of the cable connector’s head first and then pull it away from the connector.
Removing and installing components 35
To Next Page
Loading...
