Display bezel
Removing the display bezel
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the secure digital card.
3. Remove the base cover.
4. Remove the wireless card.
5. Remove the display assembly.
6. Remove the display hinge caps.
About this task
The following image indicates the location of the display bezel and provides a visual representation of the removal procedure.
Steps
1. Using a plastic scribe, pry open the display bezel from the outer edge of openings at the bottom side of the display assembly,
near the display hinges.
2. Carefully pry open the outer edge of the bottom side of the display bezel.
3. Using the plastic scribe, pry open the outside edge of the left, right, and top sides of the display bezel.
4. Lift and remove the display bezel from the display assembly.
50
Removing and installing components
To Next Page
Loading...
