About this task
The following images indicate the location of the display hinge caps and provide a visual representation of the installation
procedure.
Steps
1. Align the rib inside the right-hinge cap to the left-outer side of the right hinge.
2. Push the right-hinge cap down on the right hinge until it clicks in place.
3. Align the rib inside the left-hinge cap to the right-outer side of the left hinge.
4. Push the left-hinge cap down on the right hinge until it clicks in place.
Next steps
1. Install the display assembly.
2. Install the wireless card.
3. Install the base cover.
4. Install the secure digital card.
5. Follow the procedure in After working inside your computer.
Removing and installing components
49
To Next Page
Loading...
