Steps
1 Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly.
2 Route the coin-cell battery cable through the routing guide.
3 Connect the coin-cell battery cable to the system board.
Next step
1 Install the battery.
2 Install the base cover.
3 Follow the procedure in After working inside your computer.
Solid-state drive
Removing the M.2 2280 solid-state drive
Prerequisites
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
16
Removing and installing components
To Next Page
Loading...
