Dell Inspiron 5390 - WLAN Card; Removing the WLAN Card

5 Connect the touchpad cable to the system board and close the latch to secure the cable.
Next step
1 Install the battery.
2 Install the base cover.
3 Follow the procedure in After working inside your computer.
WLAN card
Removing the WLAN card
Prerequisites
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
About this task
The following image indicates the location of WLAN card and provides a visual representation of the removal procedure.
Steps
1 Remove the screw (M2x2.5) that secures the WLAN-card bracket to the WLAN card and lift the WLAN-card bracket o the WLAN
card.
2 Disconnect the antenna cables from the WLAN card.
3 Slide and remove the WLAN card from the WLAN-card slot.
Removing and installing components
27