Steps
1 Align and place the screw holes on the heat sink with the screw holes on the system board.
2 In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board.
3 Adhere the tape that secures the heat sink to the system board.
Next step
1 Install the battery.
2 Install the base cover.
3 Follow the procedure in After working inside your computer.
Fan
Removing the fan
Prerequisites
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
22
Removing and installing components
To Next Page
Loading...
