Dell Inspiron 5390 - Display Back-Cover; Removing the Display Back-Cover

About this task
The following image indicates the location of camera and provides a visual representation of the installation procedure.
Steps
1 Adhere the camera to the display cable (tape) and connect the camera cable to the camera and turn it over.
2 Using the alignment post, turn the camera over and adhere to the display back-cover.
3 Adhere the tape that secures the camera to the display back-cover.
Next step
1 Install the display panel.
2 Install the display bezel.
3 Install the display assembly.
4 Install the WLAN card.
5 Install the battery.
6 Install the base cover.
7 Follow the procedure in After working inside your computer.
Display back-cover
Removing the display back-cover
Prerequisites
NOTE
: This procedure is not applicable to computers shipped with a WWAN conguration.
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
4 Remove the WLAN card.
58
Removing and installing components