Dell Inspiron 5390 - Removing the M.2 2230 Solid-State Drive

Steps
1 Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive
slot on the system board.
2 Replace the screw (M2x2.5) that secures the solid-state drive to the system board.
Next step
1 Install the battery.
2 Install the base cover.
3 Follow the procedure in After working inside your computer.
Removing the M.2 2230 solid-state drive
Prerequisites
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
18
Removing and installing components