5 Remove the display assembly.
6 Remove the display bezel.
7 Remove the display hinges.
8 Remove thedisplay panel.
9 Remove the display cable.
10 Remove the camera.
About this task
The following image indicates the display back-cover and provides a visual representation of the removal procedure.
Step
After performing all the prerequisites, we are left with the display back-cover.
NOTE
: Antenna cables are a part of the palm-rest and keyboard assembly for computers shipping with WLAN
congurations.
Installing the display back-cover
Prerequisite
NOTE
: This procedure is not applicable to computers shipped with a WWAN conguration.
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the display back-cover and provides a visual representation of the installation procedure.
Removing and installing components
59