Dell Inspiron 5390 - Display Hinges; Removing the Display Hinges

Next step
1 Install the display bezel.
2 Install the display assembly.
3 Install the WLAN card.
4 Install the battery.
5 Install the base cover.
6 Follow the procedure in After working inside your computer.
Display hinges
Removing the display hinges
Prerequisites
NOTE: This procedure is not applicable to computers shipped with a WWAN conguration.
1 Follow the procedure in Before working inside your computer.
2 Remove the base cover.
3 Remove the battery.
4 Remove the WLAN card.
5 Remove the display assembly.
6 Remove the display bezel.
About this task
The following image indicates the location of display hinges and provides a visual representation of the removal procedure.
Steps
1 Remove the four (M2.5x2.5) screws that secure the display hinges to the display back-cover.
2 Remove the two (M2x2) screws that secure the display hinges to the display back-cover.
Removing and installing components
55