Flea power release
About this task
Flea power is the residual static electricity that remains on the computer even after it has been powered o and the battery has been
removed. The following procedure provides the instructions on how to conduct ea power release:
Steps
1 Turn o your computer.
2 Remove the base cover.
3 Remove the battery.
4 Press and hold the power button for 15 seconds to drain the ea power.
5 Replace the battery.
6 Replace the base cover.
7 Turn on your computer.
Wi-Fi power cycle
About this task
If your computer is unable to access the Internet due to Wi-Fi connectivity issues a Wi-Fi power cycle procedure may be performed. The
following procedure provides the instructions on how to conduct a Wi-Fi power cycle:
NOTE: Some ISPs (Internet Service Providers) provide a modem/router combo device.
Steps
1 Turn o your computer.
2 Turn o the modem.
3 Turn o the wireless router.
4 Wait for 30 seconds.
5 Turn on the wireless router.
6 Turn on the modem.
7 Turn on your computer.
80
Troubleshooting
To Next Page
Loading...
