1. Install the system board for laptops, or for system board 2-in-1s.
2. For 2-in-1s, install the world-facing camera.
3. Install the power adapter port.
4. Install the display assembly for laptops, or for display assembly 2-in-1s.
5. Install the 3-cell battery or the 4-cell battery depending on the system configuration.
6. Install the audio board.
7. Install the speakers for laptops, or speakers for 2-in-1s.
8. For systems that are shipped with a Solid State Drive (SSD), install the solid-state drive.
9. Install the palmrest and keyboard assembly.
10. Follow the procedure in after working inside your computer.
Removing and installing components
81
To Next Page
Loading...
