Installing the base cover
1. Align the edges of the back cover with the computer and press until it clicks into place.
2. Tighten the screws to secure the back cover to the computer.
3. Follow the procedure in After working inside your computer.
Battery
Removing the battery
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. To remove the battery:
a. Disconnect the battery cable from the connector on the system board [1].
b. Remove the screws that secure the battery to the computer [2].
c. Lift the battery away from the computer [3].
16
To Next Page
Loading...
